Note again that the main issue that confuses people trying to fix their system is that usually they are fixing thing in the wrong place. Since the parts that work often just work by chance, trying to fix the system assuming something is broken will often lead to change correct settings into incorrect settings.
The first step towards a clean solution is to know exactly which terminals are deviant and which not. Usually they all behave like the console, and in this case the modifications to get everything working are minimal. If, however, you have some deviant terminal (e.g., a deviant version of gnome-terminal), you will have to treat it in a special way.
The following C one-liner
void main(void) {int c; while(c = getchar()) printf("%d 0x%02X\n", c, c);} |
If you have some deviant terminal emulator, you must distinguish it from the standard ones. Theoretically, this should not be a problem because there are different entries in the terminal database for terminals with different sequences (the entry used depends on the value of the TERM variable).
Here we take the approach that the gnome entry should be used for all deviant VT100 emulators, and the xterm entry for the standard ones. This is in line with several distributions (except a few cases like RedHat ≤5.0, where the xterm entry is deviant).
However, gnome-terminal uses by default the same entry as xterm, so if one is deviant and the other one is not you will need to find a way to tell them apart. Theoretically, the option termname of gnome-terminal should allow the user to set the TERM variable to a more sensible name. However, as of gnome-terminal 1.2.1 the option does not work.
A good idea here is to exploit the fact that gnome-terminal sets the COLORTERM variable to gnome-terminal. Thus, by adding a simple test to the shell configuration files we can fix the TERM variable.
Our problem now is that the terminal database could lack a gnome entry for deviant terminals (this happens on a number of termcap and terminfo versions). Recent terminfo databases have an entry gnome, but, in any case, since gnome-terminal behaves essentially like xterm modulo our famous two keys, it is possible to automagically generate a brand new correct entry.
The readline library used by the bash and by many other programs to read the input line can be customized so to recognize specific sequences of characters. The customization can also depend on the TERM variable, so once we can distinguish terminals we can do fine tuning of the keyboard.
Moreover, if you want less and other application that do raw line input to work correctly, you must convince the shell that under a deviant terminal emulator the erase character is BS, and not DEL (in the other case the Backspace key is already emitting DEL, so we do not have to do anything). This can be done using the command stty.
| Caution |
These fixes have some drawbacks. First, they work only for the specified terminals. Second, in theory (but this is unlikely to happen) they could confuse the readline library on other terminals. Both limitations are however mostly harmless. |
First of all, check with infocmp gnome whether you already have a gnome entry in your terminfo database (we will fix termcap later). If the entry does not exist, the following command
bash$ tic <(infocmp xterm |\
sed 's/xterm|/gnome|/' |\
sed 's/kbs=\\177,/kbs=^H,/' |\
sed 's/kdch1=\\E\[3~,/kdch1=\\177,/') |
Now, add the following snippet to ~/.inputrc[1]:
"\e[3~": delete-char |
$if term=gnome DEL: delete-char $endif |
Note that the conditional assignments make deviant terminal emulators work given that the TERM variable is set correctly. To guarantee this, there are a number of techniques. First of all, since the default value of the TERM variable for gnome-terminal is xterm, if all terminals are not deviant then we do nothing. If, however, a terminal that by default uses the xterm entry is deviant you must find a way to set the TERM variable correctly; assume for instance this is true of gnome-terminal.
The simplest way to obtain this effect is to start gnome-terminal with the argument --termname=gnome, for instance by suitably setting the command line in the launcher on the GNOME panel. If however you have an old version, and this method does not work, you can add the lines
if [ "$COLORTERM" = "gnome-terminal" ]
then
export TERM=gnome
fi |
Note: Setting the terminal to gnome could prevent ls from using colours, as many versions of ls do not know that gnome-terminal is colour capable. To avoid this problem, create a configuration file ~/.dircolors with dircolors --print-database >~/.dircolors, and add a line TERM=gnome to the configuration file.
We will now generate on-the-fly a suitable termcap entry for deviant terminal emulators; this can be done as follows, always in ~/.bashrc:
if [ "$TERM" = "gnome" ]
then
export TERMCAP=$(infocmp -C gnome | grep -v '^#' | \
tr '\n\t' ' ' | sed 's/\\ //g' | sed s/::/:/g)
fi |
Finally, we must explain to the terminal device which character is generated by the erase key. Since usually the erase key is expected to backspace, for standard terminal emulators it is the DEL character, so we first set it this way and then add for each deviant terminal a conditional statement, always in ~/.bashrc:
stty erase ^?
if [ "$TERM" = "gnome" ]
then
stty erase ^H
fi |
Note: Certain distributions could have fixes already in place in the system-wide /etc/inputrc configuration file. In this case you can eliminate redundant lines from your ~/.inputrc.
In the case of the tcsh, the fixes go all in ~/.tcshrc, and follow the same rationale as the ones for the bash:
bindkey "^[[3~" delete-char
if ($?COLORTERM) then
if ($COLORTERM == "gnome-terminal") then
setenv TERM gnome
endif
endif
stty erase ^?
if ($?TERM) then
if ($TERM == "gnome") then
setenv TERMCAP \
"`infocmp -C gnome | grep -v '^#' | tr '\n\t' ' ' | sed 's/\\ //g' | sed s/::/:/g`"
bindkey "\177" delete-char
stty erase ^H
endif
endif |
| [1] | On older version of the bash, you must remember to set INPUTRC suitably, for instance adding
| |
| [2] | More precisely, to the shell configuration file that is read in every shell, not only in login shells. The right file depend on startup sequence of your bash. |